 |
 |
 |
STRAIGHT LINE RIP
SAW SRS - 300 |
¡@ |
 |
| ¡@ |
¡@ |
|
 |
 |
 |
| ¡@ |
- Since it was first
manufactured in 1971, the SRS-300 has been continuously
upgraded and improved to give optimum ripping
performance and reliability.
- Robust cast iron & steel
construction
- Guarantee 5ft glue line
- Small compact design
- Affordability with durability
- Fully integrated safety
guards
- Auto lubrication to 5 points
with low oil alert
- Available with single
phase saw arbor motor (up to 7.5HP), or without
motors and controls for line shaft setup
|
|
¡@ |
|
| ¡@ |
|
|
|
|
|
|
CONSTRUCTION &
FEATURES : |
¡@ |
|
|
| ¡@ |
¡@ |
|
|
 |
 |
| •
SOLID STEEL CYLINDRICAL GUIDE RAIL AND QUICK
CAM CAST IRON FENCE |
| ¡@ |
Ensures accurate setup,
quick movement, dust free operations. Magnification
lens allows precise positioning to inlaid
scale. |
|
¡@ |
|
| ¡@ |
|
|
|
|
|
| •
SWING DOWN REAR TABLE |
| ¡@ |
Avoids possible damage
to the machine by preventing short work
pieces and defective lumber from accidentally
sliding between the chain and the table
when they are fed to the end.
|
|
¡@ |
|
| ¡@ |
|
|
|
|
|
| •
ANTI-KICKBACK FINGERS FOR OPERATOR SAFETY |
| ¡@ |
The first row of anti-kickback
fingers is independently mounted on an overarm,
without being affected by the pressure elevation
device. The independent second row of anti-kickback
fingers is located at the front of the saw
blade.
|
|
¡@ |
|
| ¡@ |
|
|
| |
| ¡@ |
¡EPRECISION-BUILT
SAW ARBOR MOUNTING |
| ¡@ |
Made of nickel-chrome steel, large in diameter,accurately
ground and dynamically balanced, it runs on precision angular
contact type ball bearings which eliminate any radial run
out and axial thrust.
|
| ¡@ |
¡EPRECISION CONYEYOR CHAIN AND
GUIDE RAILS |
| ¡@ |
Pins are ground. The chain blocks are diamond cut, precision
machined and heat treated for positive lumber feeding. Expect
years of glue line accuracy from these highly engineered
components forged and cut from the best possible steel and
cast iron.
|
|
|
|
|
| •
LASER LITE & BRACKET (OPTIONAL) |
| ¡@ |
Provides convenient
positioning cut, which reduces material
waste to a minimum.
|
|
¡@ |
|
| ¡@ |
|
|
|
|
|
| •
SELF-LUBRICATOR (ELECTRICAL TYPE) |
| ¡@ |
Lubricant flow rate
suits constant speed of precision chain,
Lubrication frequency is one shot per 5
minutes, Lubrication quantity is adjustable
from 3cc to 6cc. If there is insufficient
oil, the warning lamp lights up and the
feed chain stops automatically.
|
|
¡@ |
|
| ¡@ |
|
|
|
|
|
| •
SIDE GUARD (OPTIONAL) |
| ¡@ |
The side guard provided
at the in feed end gives added safety for
the operator.
|
|
¡@ |
|
| ¡@ |
|
|
|
|
|
| •
OUTFEED PRESSURE PLATE (OPTIONAL) |
| ¡@ |
The additional pressure
plate at the out feed end ensures a firm
out feed of the work piece.
|
|
¡@ |
|
| ¡@ |
|
|
| Model |
SRS-300 |
| Minimum working length |
200mm(8") |
| Maximum thickness |
85mm(3.35") |
| Distance between saw and column |
350mm(13.75") |
| Saw arbor motor |
5HP,71/2HP or 10HP |
| Saw arbor speed |
4500 rpm |
| Saw blade diameter |
dia. 200-300mm(8"-12") |
| Saw arbor diameter |
dia. 25.4mm(1") |
| Feed motor |
1HP |
| Feed speed |
15,20,25M/min (50,65,82ft/min) |
| Number of holding rollers |
6 |
| Work table height |
760mm(30") |
| Table area (W x L) |
760x1270mm(30"x50") |
| Overall dimension(W x L x H) |
960x1530x1350mm (38"x60"x53") |
| Shipping dimension (W x L x H) |
1150x1500x1480mm (45"x59"x58") |
| Net weight |
850kgs (1870lbs) |
| Gross weight |
1050kgs (2310lbs) |
¡@
|
