KUANG YUNG MACHINERY CO., LTD.

　

		STRAIGHT LINE RIP SAW SRS - 12

Variable speed models are available
Maximum main drive motor up to 15HP.
Available with single phase saw arbor motor (up to 7.5HP), or without motors and controls for line shaft setup
Robust 2100lb construction
Available with return conveyor

　

The SRS-12 is the flagship rip saw of the entire Kuang Yung lineup. Ideally suited for the millwork,cabinet, and furniture companies requiring both maximum performance and affordability.

Guarantee glue line accuracy to 8ft.
Safety engineered throughout on SRS-12
Double rows anti-kickback fingers
Mechanical type cubricatlon.
Auto shut-off of chain if oil levels are low
One piece heat treated chain and race

　

　

		Common Features of Rip Saws to SRS-12 , SRS-14

• SOLID STEEL CYLINDRICAL GUIDE RAIL AND QUICK CAM CAST IRON FENCE
	Ensures accurate setup, quick movement, dust free operations. Magnification lens allows precise positioning to inlaid scale

　

　

• SWING DOWN REAR TABLE
	Avoids possible damage to the machine by preventing short work pieces and defective lumber from accidentally sliding between the chain and the table when they are fed to the end.

　

　

• ANTI-KICKBACK FINGERS FOR OPERATOR SAFETY
	The first row of anti-kickback fingers is independently mounted on an overarm, without being affected by the pressure elevation device. The independent second row of anti-kickback fingers is located at the front of the saw blade.

　

　




	PRECISION-BUILT SAW ARBOR MOUNTING Made of nickel-chrome steel, large in diameter,accurately ground and dynamically balanced, it runs on precision angular contact type ball bearings which eliminate any radial run out and axial thrust. PRECISION CONVEYOR CHAIN AND GUIDE RAILS Pins are ground The chain blocks are diamond cut, precision machined and heat treated for positive lumber feeding. Expect years of glue line accuracy from these highly engineered components forged and cut from the best possible steel and cast iron.

•LASER DEVICE & BRACKET (OPTIONAL)
	Provides convenient positioning cut, which reduces material waste to a minimum.

　

　

• SELF-LUBRICATOR (ELECTRICAL TYPE)
	Lubricant flow rate is adjusted automatically with the variation of feed chain speed. Auto shut-off of chain and warning lamp indication if oil levels are low. Applies oil to (5) precise points on chain and race, guaranteeing maximum chain life.

　

• SIDE GUARD (OPTIONAL)
	The side guard provided at the in feed, end gives added safety for the operator.

　

　

• OUTFEED PRESSURE PLATE (OPTIONAL)
	The additional pressure plate at the out feed, end ensures a firm out feed of the work piece.

　

　

　

		SPECIFICATIONS:

Model	SRS-12
Minimum working length	200mm(8")
Maximum thickness	85mm(3.35")
Distance between saw and column	460mm(18")
Saw arbor motor	71/2HP,10HP or 15HP
Saw arbor speed	4500 rpm
Saw blade diameter	dia. 200-300mm(8"-12")
Saw arbor diameter	dia. 25.4mm(1")
Feed motor	2HP
Feed speed	17-40M/min (37'-88'/min)
Number of holding rollers	6
Work table height	800mm(31.5")
Table area (W x L)	950x1450mm(37"x57")
Overall dimension(W x L x H)	1150x1720x1560mm (45"x68"61")
Shipping dimension (W x L x H)	1400x1650x1510mm (55"x65"x60")
Net weight	950kgs(2090lbs)
Gross weight	1150kgs(2530lbs)

　

　