The link chain blocks are made of special cast iron. The high-grade steel connecting pins are heat-treated and ground. Each precisely made part guarantees accurate straight line feeding even at high speeds.

Three rows of anti-kickback fingers are positioned at the frontal and side plate to guarantee safe operation. A specially designed width safety limit switch prevents over-wide workpieces from damaging the cover.

The variable feed speed allows for cutting various stock materials, and can be easily adjusted by the handwheel at the stock infeed position.

Provides convenient positioning of cut, which reduces material waste to a minimum.

The PU plated chain block is used to prevent damage to the workpiece surface.

The lubrication frequency and quantity are accurately controlled by a numeric controller, ensuring a proper oil film on the link chain and rail. If there is insufficient oil in the oil tank, the warning lamp lights up, and the link chain stops running automatically. This fully ensures the service life of the link chain and rail.

The feeding conveyor utilizes powerful upper and lower toothed
infeed rollers, improving safety and
efficiency when working with heavy
workpieces.

For overload protection of the saw
motor. If the load of the saw motors exceeds the rated amperes, the link chain slows down automatically. This prevents the stock push from damaging the saw arbors or damaging the sawblade.