The machine is equipped with a mist collong device, providing cooling and cleaning for sawblades during cutting. This increases smoothness during cutting and extends service life of sawblades.

The saw arbor elevation is driven by a motor. An independent switch mounted at the outfeed end allows the operator to conveniently check the saw arbor elevating position to avoid sawblandes cutting on feed chain pads.

Provides convenient positioning of cut, which reduces material waste to a minimum.

Specially designed chain block construction provides convenient replacement of chain block when worn out.

The additional powered outfeed roller, equipped at the outfeed end, ensures smooth workpiece outfeed even for thick, heavy and moist wood.

The central lubrication system ensures a permanent oil film between the chain and the guide rails. It varies the oil volume according to the cutting requirements of various kinds of wood. If there is insufficient oil in the oil tank, the warning lamp lights up, and the feed chain stops running automatically. This fully ensures the service life of the feed chain and precision rails.

• An overload protection of the saw motor. If the load of the saw motor exceeds the rated amperes, the link chain slows down automatically. This prevents the stock push from damaging the saw arbor or damaging the sawblade. Prolongs the life of sawblade by up to 10-20%.
• The variable feeding speed is inverter controlled with frequency motor and easily adjusted by the control panel.