Features Dimensions Specifications Catalogue Video Download  
 
Features
Minimum Length of Workpiece 200mm (8")
 
  • CE Type

Designed and engineered for lumber cores, finger jointed panels and material preparation in furniture factories.

 

 
  • Standard Type

Each three rows of pressure rollers at the front and rear, combined with a specially designed pressure plate, make it possible to feed panels of 200mm minimum length.

 

 

Each three rows of pressure rollers at the front and rear, combined with a specially designed pressure plate, make it possible to feed panels of 300mm minimum length.
 
MRS-12 Multiple Rip Saws Outstanding Features
 
LASER DEVICE (OPTIONAL)
Provides convenient positioning of cut, which reduces material waste to a minimum.
 
PU PLATED FEED CHAIN BLOCK (OPTIONAL)
The PU plated chain block is used to prevent damage to the workpiece surface.
 
POWERED ELEVATION ROLLERS (OPTIONAL FOR MRS-12)
 
ANTI-KICKBACK GUARDING SYSTEM
Two upper rows and one bottom row of anti-kickback fingers are engineered to provide comprehensive operator security.
 
LINK CHAIN FEED
The link chain blocks are made of special cast iron. The high-grade steel connecting pins are heat treated and precision ground.
Each precisely made part guarantees straightline dip feeding even at high speeds.
 
ADJUSTABLE LUBRICATION FOR MRS-12, MRS-300
The adjustable central lubrication system ensures a permanent oil film between the chain and the guide rails. If there is insufficient oil in the oil tank, the warning lamp lights up, and the link chain stops running automatically. This fully ensures the service life of the link chain and rails.
 
ELECTRICAL AMPERAGE DISPLAY (OPTIONAL)
For overload protection of the saw motor. If the load of the saw motor exceeds the rated amperes, the link chain slows down automatically. This prevents the stock push from damaging the saw arbor or damaging the sawblades.

 
Dimensions
 
 

 
Specifications
Model MRS-12
Max. cutting thickness 85 mm (3.346")
Max. cutting thickness (w/short stock device) 70 mm (2.756")
Max. cutting width 300 mm (11.811")
Distance from column to link chain center 360 mm (14.173")
Mini. working length 400 mm (16")
Mini. working length (w/short stock device) 200 mm (7.874")
Max. sawblade diameter 300 mm (12")
Mini. sawblade diameter 200 mm (8")
Sawblade bore 70 mm (2.756")
Saw arbor diameter 50 mm (1.969")
Saw arbor speed 3800 rpm
Saw arbor motor 30, 40, 50 HP
Variable feed speed 7.5-30 M/min (24'-98'/min)
Variable feed speed (for electrical amperage display) 2.5-24 M/min (8'-79'/min)
Feed motor 2 HP (3HP on request)
Hold down roller elevating motor 0.5 HP (optional)
Table area (LxW) 1530mmx 760mm (60"x30")
Packing dimensions (LxWxH) 1820x1700x1610 mm (71.6"x67"x63.4")
Net weight 2000 kgs
Gross weight 2250 kgs

 

 
http://www.kuangyung.com info@kuangyung.com.tw